Window tint installation at KODWorking the film against the rear glass.8 seconds · No audio
Real work by KOD
See the tint being installed.
Tint being fitted to a van’s rear window at KOD. This is part of the hands-on work behind the finished glass.
Film, shade and installation finish are confirmed separately for your vehicle.
Three films. Three priorities.
Find your comfort level.
Shade controls how dark the glass looks. Film technology determines much of its heat-rejection performance. Darker does not automatically mean better ceramic performance.
Best-value starting point
SunTek Carbon
Our value choice for quality, appearance and privacy where permitted. A non-metal carbon film for drivers who want a good result at the best price.
Privacy and glare reduction depend on shade
More budget-friendly than our ceramic choices
Over 99% UV rejection in SunTek’s listed shades
Step into ceramic
SunTek CIR
A great entry into ceramic tint. A meaningful step up in heat rejection from Carbon, with strong comfort performance without choosing our highest line.
More solar heat rejection than Carbon at comparable shades
Non-metal ceramic technology
Over 99% UV rejection, except CIR 80: over 97%
Our highest-performance ceramic
SunTek Evolve
The premium ceramic choice for maximum heat rejection among these SunTek lines at comparable shades. Choose it when comfort and performance lead the decision.
SunTek’s highest-performing ceramic tint line
Up to 94% selective infrared rejection (SIRR)
Over 99% UV rejection in all listed shades
Lifetime limited warranty, whichever line you choose.
SunTek Carbon, CIR and Evolve carry a manufacturer’s lifetime limited warranty against covered film defects, including cracking, delamination and color change. Terms, exclusions and legal-installation requirements apply. Ask for the warranty for your selected film; coverage is not a promise against every scratch, damage or installation issue.
Compare the numbers, not just the darkest shade.
SunTek’s current North America sheet lists Carbon 35 at 38% total solar energy rejection (TSER), CIR 30 at 55%, and Evolve 35 at 57%. Their tested VLT values are 36%, 33% and 38% respectively, so these are nearby shades, not identical tests. TSER measures total solar energy rejection. Evolve’s “up to 94%” claim is selective infrared rejection, not rejection of 94% of all solar heat.
Published results use 6 mm clear reference glass and vary with the actual glass. UV values cover 300–380 nm. Film names, nominal shade and finished vehicle VLT are different. Read SunTek’s official performance sheet ↗.
Manufacturer details: Carbon · CIR · Evolve. Shade availability and suitability are confirmed for your vehicle.
New York tint law, in plain language
“Clear-looking” is not the same as 100% VLT.
New York generally requires at least 70% of visible light to pass through the finished windshield and front side windows. The measurement includes the factory glass and any added film.
Windshield + front doors
70% minimum
This applies across vehicle types. The law allows darker material only in the uppermost six inches of the windshield. A whole-windshield film must still meet the applicable finished-glass requirement unless a valid approved exemption applies.
Rear doors + rear side glass
Vehicle class matters
Passenger cars, including sedans, coupes, convertibles, hatchbacks and station wagons, also need at least 70% VLT here. SUVs, crossovers and other vehicles classified as multipurpose passenger vehicles can generally have darker rear-side glass. Body style alone is not enough: check the federal classification label at the left front door.
Rear windshield / back glass
Check both mirrors
Darker rear glass is permitted when outside mirrors on both sides provide a full, clear view behind the vehicle. That includes sedans, coupes and convertibles. Without those mirrors, the rear window must meet the 70% rule.
Why even a light film can fall below 70%.
Factory glass can look clear yet already transmit only around 70–80% of visible light. Added film reduces that further. As a simplified illustration, 75% glass × a film transmitting 90% on its own is about 67.5% combined. Even a light film can therefore fail the 70% requirement.
This example is not a certification or a calculation using SunTek’s reference-glass numbers. A film labeled “70” or “80” is not automatically New York legal. We must review the vehicle and measure the finished glass. Existing factory privacy glass counts too.
A medical exemption is not required to request an appointment. If you already have a DMV-issued exemption, you can tell us in the form so it can be reviewed. It is not a blanket approval for every window or shade, and a pending application or doctor’s note alone is not DMV approval. Please do not send diagnoses or medical documents through this form.
New York prohibits noncompliant installation. Requesting a shade or agreeing to proceed does not make an unlawful setup legal. If your first choice does not qualify, we can discuss lawful alternatives before any work is agreed.
Our DriveSuite window-tint pricing is more accurate and complete than our PPF software pricing. Select your vehicle, film and coverage for current prices and available appointments.
Final scope is confirmed before installation. Existing film removal, unusual glass, selected finish and legal suitability can affect the job. A software price does not approve a shade for New York use.
Choose your vehicle and film
Carbon for value, CIR for ceramic comfort, Evolve for the highest performance of these lines.
Choose windows and finish
Confirm exactly which glass is included, the desired appearance and the installation standard.
Review before booking
Missing vehicle or package? Use the pricing form below so we can help with a suitable scope.
A few things to know before tinting.
Is privacy glass the same as ceramic film?
No. Dark factory glass tells you about appearance, not the same heat and UV performance as a selected aftermarket film. Its existing VLT still affects the finished reading. We review the glass and the goal before recommending a film.
Which installation finish is right for me?
Daily Driver Finish is the lower-cost option with more allowance for minor cosmetic variation. Industry Standard Finish includes more installation time and tighter cosmetic standards. Review the current scope and finish criteria in DriveSuite. Neither means a flawless result.
Can I choose a shade before you check the vehicle?
Yes, tell us your preference. It is a request for review, not a promise we can install it. Film availability, vehicle classification, original glass and New York requirements determine the final options.
What should I expect while tint cures?
Temporary moisture or haze can occur during curing. Follow the supplied window-use and cleaning instructions, avoid damaging the film, and contact KOD if something does not look right. We can assess whether the concern is curing, workmanship or a film defect.
Do I need a medical exemption to make an appointment?
No. You can request an appointment without an exemption. Any installation still needs to comply with the requirements that apply to your vehicle. If you have a DMV-issued exemption, tell us so its scope can be reviewed.
Your window tint plan
Tint pricing form.
Tell us the vehicle, film, windows and result you want. We will review the options, legal suitability and price around your priorities.
Four short steps. Required questions are marked *. Prior-quote details and medical-exemption status are optional.
Thanks. Your window tint inquiry has been received. KOD will review your vehicle, requested film and shades before confirming a price or appointment. This is not an installation approval or reservation.
We could not send your inquiry. Your answers are still here. Please try again, or call 845-442-5983.